Curtis IP1490 - Manual (Page 16)

OPERATING INSTRUCTIONS
15
Video Out
You will need a television or other video device that has a composite video input.
Securely dock the iPod
® .
Connect the yellow RCA cable (Not Included) into the rear video out jack on the unit.
Connect the other end of the yellow RCA cable to the video device.
For Movie Output
Press the IPOD Button on the unit.
Switch on the iPod ® Movie.
On the Main Menu choose Video then select Video Setting.
At the TV Out section set it to “ON”.
Switch back to movie library and play the movie of your choice.
For Photo View
Press the IPOD
Album & Playlist (For iPod only)
ALBUM: - Press the ALBUM UP/DN Buttons to increase or decrease the album
number.
PLAYLIST: - Press the PLAYLIST UP/DN Buttons to cycle up or down through the
playlists on an iPod.
B utton on the unit.
Switch on the iPod ® Photo.
On the Main Menu choose Photo then select Slide Show Settings.
At TV Out section set it to “ON”.
Go to Photo Library and then press play. The slideshow will play on your device.
Note: The RCA Video input connector on a television is usually color coded yellow to
match the color on the AV cable.
Note: When playing movies, the audio will only playback on the unit speakers.
Note: RCA Cable is not included.
AUX In:
The AUX in jack can be used to playback alternate audio signal sources on
the unit speakers.
Make sure that your radio is turned off and unplugged from the power outlet.
Plug the audio connectors on 3.5mm audio cable into the clock radio.
Plug the other end of the audio cable into the Audio out jack on the audio input device.
Slide the FUNCTION button to AUX and display will appears AUX icon.
Turn on the external audio device and use the device's controls to control playback.