Curtis IP1490 - Manual (Page 5)

4
Power Sources
This portable audio system is designed to operate on
either 120V AC, 60Hz house current.
AC Operation
Unwind the AC cord and extend it to its full length. Insert the small end of the AC cord into the AC
socket on the rear of the unit. Insert the other end of the AC cord into any convenient 120V AC,
60Hz household outlet.
Please note that this unit is equipped with a polarized AC plug which has one blade wider than the
other. This is a safety feature to reduce the likelihood of electric shock. This polarized AC plug will
only fit in a polarized AC outlet. If you find that you cannot insert this plug into your outlet, you may
have an obsolete non-polarized outlet. Please do not try to defeat this safety feature by using a
non-polarized adapter or by filing the wider blade to make it fit into your outlet. If this plug does not
fit into your outlet, you should contact a qualified licensed electrician
to replace your obsolete outlet.
PREPARATION FOR USE
AC Plug
AC Outlet
Connecting the Speakers
Place the speakers on either side of the main unit.
Connect the speaker on the left side of the main unit to the "L" speaker jack on the
back panel.
Connect the speaker on the right side of the main unit to the "R" speaker jack on
the back panel.
Right Side Speaker Left Side Speaker
Speaker wire with white strip will connect to "Red" speaker jack and speaker wire without
the white strip will insert to "Black" speaker jack
Make sure the speaker wires are fully inserted and locked into the speaker jacks on the
back panel of the main unit.