Ericsson BS120 - Manual (Page 42)

42
Not
fo
r C
om
me
rc
ia
l Use
Er
icsso
n
Mo
bi
le
C
omm
un
ic
ations
AB
4. Enter the 4 digits of the new PIN code.
The new PIN code is displayed for a short period.
5. Enter the new PIN code again.
The PIN code is checked.
6. Press and then press .
The cordless phone now has the new PIN code.
Securing against switching on
You can set the cordless phone so that the PIN code
must be entered to switch it on. This option is off by
default.
1. Press and then press for 2 seconds.
If the programming security for the cordless
phone is on four dashes are displayed. If so enter
the PIN code for the cordless phone (default is
0000).
2. Two dashes are displayed.
3. Enter 33.
The current setting is displayed (0 = off, 1 = on).
4. Enter one digit to switch the PIN security on or
off:
‘0’ to switch security off
‘1’ to switch security on
5. Press and then press .
The security setting against switching on has now
changed.
Securing against programming
You can make sure that only you can program the
cordless phone. You can set the cordless phone so that
the PIN code must be entered to program it.
1. Press and then press for 2 seconds.
If the programming security for the cordless
phone is on four dashes are displayed. If so enter
the PIN code for the cordless phone (default is
0000).
2. Two dashes are displayed.
3. Enter 34.
The current setting is displayed (0 = off, 1 = on).