Encore electronic ENNUS1 - Manual (Page 10)

You must change the IP address (or using DHCP) of the ENNUS1 server so that the
ENNUS1 server and your PC are in the same subnet. To do this, please double-click on
the ENNUS1 server, and the following window will appear. Change the IP setting to
make ENNUS1 server and your PC within the same subnet. After automatic reboot,
Control Center will show the ENNUS1 server in blue, meaning you can access these
servers by the NetUSB technology.
192.168.1.100
1
4.4 Installation of USB Device Driver
Some USB devices, like printers or MFPs (multifunction printers), require installing
vendor-supplied driver (usually on vendor’s CDROM). For those USB devices that do
not require drivers, please skip this section.
A. Insert vendor’s CDROM into the CD drive and run the “autorun” program.
B. Follow the instructions of the installation program to install driver.
9