Encore electronic ENNUS1 - Manual (Page 27)

Chapter8 Restore Factory Defaults
You may restore the ENNUS1 Server’s default parameters by one of the following
methods.
8.1 Using the ENNUS1 Server’s Web Pages
1. Go to the ENNUS1 Server’s web page and click CONFIG
2. Enter administrator (default: admin) and password (default: admin).
3. Click Maintenance.
4. Click Factory Default.
5. Click Yes to confirm
8.2 Using Init Button
Plug in the power adaptor while pressing the Init button until the USB LED blinks. After
that, unplug the power adaptor and then plug in the power adapter again to restart
the ENNUS1 server. The ENNUS1 server will now operate using the factory default
values.
26