Encore electronic ENNUS1 - Manual (Page 23)

6.2.2 Setting up ENNUS1 Server Configuration
To set up the ENNUS1 Server configuration, click on the “CONFIG” icon and then the
system will request user to enter administrator (default: admin) and password
(default: admin) to login.
„
General Configuration
Š Server Information: You have to set the Server Name, which is the
name to represent the ENNUS1 Server.
Š TCP/IP: You have to set the ENNUS1 Server’s TCP/IP configuration to
connect TCP/IP network. Please see Chapter 3 Basic Installation for more
details.
„
Administrator: You can change administrator name and password. If you
forget administrator name and password, you must perform Restore Factory
Default action by plugging in the power adaptor while pressing the Init button.
Please refer to the chapter “Restore Factory Defaults”.
5 Administrator: enter your desired administrator name.
5 New Password: enter your desired password.
5 Re-type Password: re-confirm the password.
22