Power supply, Loading batteries, E-38 – Casio QV-3000EX/Ir User Manual
Page 38
POWER SUPPLY
E-38
POWER SUPPLY
The camera features a two-way power supply that lets you
use either batteries (AA-size alkaline, lithium or Ni-MH) or
household AC current.
Loading Batteries
Be sure that camera power is turned off whenever loading or
replacing batteries.
1.
On the bottom of the
camera, slide the battery
compartment cover lock
towards the back of the
camera (
1
1
1
1
1
) to unlock the
cover.
2.
Pressing down on the
battery compartment
cover, slide it towards
the side of the camera to
release it, and then
swing the cover up to
open it (
2
2
2
2
2
).
3.
Load the batteries so
their plus (+) and minus
(–) ends are facing as
shown in the illustration.
4.
Swing the battery com-
partment cover closed
and then slide it towards
the center of the camera
to secure it in place (
1
1
1
1
1
).
5.
Slide the battery com-
partment cover lock to-
wards the front of the
camera to lock the cover
(
2
2
2
2
2
).
Be sure to use alkaline, lithium or Ni-MH batteries.
Never use manganese batteries (see precautions on
the next page).
• Make sure the battery compartment cover is locked se-
curely. Failure to do so can result in the cover opening,
creating the danger of personal injury and corruption of
image data.
1
2
2
1