Casio QV-3000EX/Ir - Manual (Page 84)

PLAYBACK
E-84
Screen Saver
The screen saver function automatically activates Slide
Show (which automatically scrolls through images)
whenever you do not perform any operation for about five
minutes in the PLAY Mode. This protects the camera’s
monitor screen and the screen of a connected TV against
“burn in” of a static image that is left displayed too long.
IMPORTANT!
• The screen saver is enabled only when the camera is
being powered by its optional AC adaptor. If you do
not perform any operation for five minutes under bat-
tery power, camera power automatically turns off
(Auto Power Off).
• The screen saver displays protected images only. The
screen saver is disabled if there are no protected im-
ages in memory.
• Photo Loader will not send images between the cam-
era and a personal computer while the screen saver is
turned on. Make sure you turn off the screen saver
before trying to perform any image transfer operation.
Note that the screen saver is turned on when you pur-
chase the camera.
1.
Align the POWER/Function Switch with PLAY.
2.
Press MENU.
3. Select “Tools” “Screen Saver” “On”.
• “Tools” appears on the advanced menu only.
• To turn off the screen saver, perform the above proce-
dure and select “Off”.
• The screen saver activates if you do not perform any
operation for about five minutes in the PLAY Mode.
• Press any key to exit the screen saver.
• When changing between images, the screen saver
uses the interval that is specified for Slide Show (page
E-83).