Casio STC-PC10 - Manual (Page 21)

19
4 Click OK.
This completes the stamp printing process.
Now you can assemble the stamp using the steps explained in the
Printer User’s Guide.
Using an Image Stored on Your
Computer to Create a Stamp
(Create from image)
This section explains how to use an image (photograph) stored
on your computer to create a stamp.
The general fl ow for laying out a stamp using an image on your computer
is described below.
1 Select the image.
Select an image (photograph) that is stored on your computer.
2 Specify the size of the stamp and adjust the size and
positioning of the image.
Decide on the size of the stamp you want to create, zoom the
image to fi t, and then adjust its position.
3 Trim what you want from the image.
You can trim a specifi c part of the image. Next, use the steps
below to make fi ne adjustments.
4 Adjust the extracted image.
Make fi ne adjustments to the image you trimmed above. You can
restore parts of the image that are no longer visible, and further
trim the image.