Eicon Networks V8.3 - Manual (Page 15)

About Diva Server for Windows 15
Multiport PRI adapters
Analog adapters
Requirements for software installation
For the installation of Diva Server for Windows, the following requirements have to be met:
• PC/AT-compatible computer (at least 500 MHz or higher processor with at least 500
MB RAM)
• Windows 2000, Windows XP, or Windows Server 2003 operating system
• At least 15 MB free space on the drive on which the operating system is installed
• An installed Eicon Diva Server adapter
Diva Multiport PRI adapters:
• At least 1.5 GHz or higher processor
• At least 512 MB RAM (if more adapters are installed the capacity needs to be at least
1 GB)
• Power supply with 450 W (6A with 3.3 V per Diva Server Multiport PRI adapter)
Note: Depending on the computer, a stronger power supply needs to be used.
To install your Diva Server adapter in your computer, refer to the printed installation guide
that came with your Diva Server adapter or that you downloaded from the Eicon Web site.
• Diva Server V-2PRI/E1/T1
• Diva Server V-4PRI/E1/T1
Diva Server Analog Diva Server V-Analog
• Diva Server Analog-2P
• Diva Server Analog-4P • Diva Server V-Analog-4P
• Diva Server Analog-8P • Diva Server V-Analog-8P