Eicon Networks V8.3 - Manual (Page 69)

Features 69
1)
Conference functionality is limited to eight participants.
Supplementary services
The Diva Server for Windows software supports basic call services for all switch types
that are available in the Diva Server Configuration Manager. In addition to this, it offers
supplementary services for the following switch types:
• Euro-ISDN (ETSI) BRI and PRI
• 5ESS Custom (AT&T)
• 5ESS NI (Lucent/Avaya)
• DMS 100 (Nortel)
• Q-Sig
Q-Sig support is available for the derivatives ECMA-QSIG, and ISO-QSIG. Thus, the
Q-Sig switch type can be used with any PBX based on one of these derivatives.
Q-Sig has been tested with a number of various switches, for example, Alcatel 4200,
Alcatel 4400, 4410, DeTeWe OpenCom 1000/1010, Ericsson MD 110, Ericsson
BP250, Hicom 150, Hicom 300, Lucent Definity, Matra 65xx, Nortel Meridian, Nortel
M65xx, Siemens HiPath 3000, and Siemens HiPath 4000, Tenovis.
The table below gives a detailed overview of the supplementary services supported by
the switch types listed above.
Note: The availability of supplementary services also depends on your PBX. For detailed
information on supplementary services supported by your PBX, contact the PBX
manufacturer.
Diva Server PRI PCIe
Diva Server PRI/E1/T1-CTI PCIe • 1) •
Diva Server PRI/E1-30 PCIe
Diva Server V-PRI/E1-30 PCIe
• •
Supplementary services
with switch type Euro-ISDN
(ETSI) PRI
Euro-ISDN
(ETSI) BRI Q-Sig
5ESS Custom
(AT&T),
5ESS NI
(Lucent/Avaya),
DMS 100
MSN (multiple subscriber
number) • • • •
(incoming)
DDI (direct dialing-in) • • •
SUB (sub-addressing) • • • •
Switching and conferencing via
adapter: Switching and conferencing
(within one board) Cross-board switching