Eicon Networks V8.3 - Manual (Page 19)

Software Installation 19
Installing fully detected Diva Server adapters under Windows XP
1. After you have installed your Diva Server adapter as described in the printed
installation guide that came with your adapter or that you downloaded from the Eicon
Web site, start your computer.
Note: You must log on with administrator rights to install Diva Server for Windows.
2. Windows detects the Diva Server adapter.
3. The ‘Found New Hardware Wizard’ is displayed. Click ‘Next’ to continue.
4. In the ‘ISDN Switch Type or D-channel Protocol’ box, select the D-channel protocol
(switch type) as specified by your ISDN service provider, for example European ISDN
(DSS1).
Click ‘Next’.