Alling one of the following adapters, see, Installing diva server adapters, Detected as ‘new hardware – Eicon Networks V8.3 User Manual
Page 31
Software Installation
31
Installing Diva Server adapters detected as ‘New Hardware’
The installation procedure of Diva Server adapters detected as ‘New Hardware’ depends
on your operating system:
•
If you are installing the Diva Server adapter under Windows 2000, see
Diva Server adapter under Windows 2000:
below.
•
If you are installing the Diva Server adapter under Windows XP or Windows Server
2003, see
To install the Diva Server adapter under Windows XP and Windows Server
To install the Diva Server adapter under Windows 2000:
1.
After you have installed your Diva Server adapter as described in the printed
installation guide that came with your adapter or that you downloaded from the Eicon
Web site, start your computer.
Note: You must log on with administrator rights to install Diva Server for Windows.
2.
Windows 2000 detects the new hardware and starts the ‘Found New Hardware
Wizard’.
3.
In the welcome dialog box, click ‘Next’.
4.
In the ‘Install Hardware Device Drivers’ box, select ‘Search for a suitable driver for my
device (recommended)’.
Click ‘Next’.