Eicon Networks V8.3 - Manual (Page 50)

Dial-Up Networking and RAS Administration 50
Under Windows 2000 and Windows XP:
To observe the progress of an active connection, click ‘Start > Settings > Network and
Dial-up connections’ and right-click the connection. Select ‘Status’ (see also
RAS status
on page 56).
To specify the network protocol(s) for every set-up connection, click ‘Start > Settings >
Network and Dial-up connections’ and right-click the connection. Select ‘Properties’.
In the properties dialog box of your connection, click the ‘Networking’ tab. You can now
activate the desired network protocol(s) for your connection.
For more detailed information on the RAS client, see the Windows 2000 or Windows XP
RAS documentation.
Under Windows Server 2003:
To observe the progress of an active connection, click ‘Start > Control Panel > Network
Connections’ and right-click the connection. Select ‘Status’ (see also
RAS status on
page 56).
To specify the network protocol(s) for every set-up connection, click
‘Start > Control Panel > Network Connections’ and right-click the connection. Select
‘Properties’.
In the properties dialog box of your connection, click the ‘Networking’ tab. You can now
activate the desired network protocol(s) for your connection.
For more detailed information on the RAS client, see the Windows Server 2003 RAS
documentation.