Emerson MicroCEM - Manual (Page 80)

Instruction Manual
748467-A
January 2002
3-28 Operation Rosemount Analytical Inc. A Division of Emerson Process Management
Model MicroCEM
3-10 AUTO CALIBRATION
The Auto Calibration dialog is displayed
whenever calibration is in process. It dis-
plays the current emission values and the
status of the calibration. The calibration
may be canceled before it completes by
pressing the Cancel button.
Note: The title of this dialog will read either “Auto Calibration” or “Manual Calibration” to indicate how the cali-
bration process was initiated.
Figure 3-26. Auto Calibration