Edge Products ES3528-WDM - Manual (Page 177)

Displaying Global Settings
11-5
11
CLI – This command displays global STA settings, followed by settings for each port.
Note: The current root port and current root cost display as zero when this device is not
connected to the network.
Console#show spanning-tree 29-18
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode: MSTP
Spanning tree enable/disable: enable
Instance: 0
Vlans configuration: 1-4093
Priority: 32768
Bridge Hello Time (sec.): 2
Bridge Max Age (sec.): 20
Bridge Forward Delay (sec.): 15
Root Hello Time (sec.): 2
Root Max Age (sec.): 20
Root Forward Delay (sec.): 15
Max hops: 20
Remaining hops: 20
Designated Root 32768.0.0000ABCD0000
Current root port: 1
Current root cost 200000
Number of topology changes: 1
Last topology changes time (sec.): 13380
Transmission limit: 3
Path Cost Method: long
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin status: enabled
Role: disable
State: discarding
External admin path cost: 10000
Internal admin cost: 10000
External oper path cost: 10000
Internal oper path cost: 10000
Priority: 128
Designated cost: 300000
Designated port: 128.1
Designated root: 32768.0000E8AAAA00
Designated bridge: 32768.0030F1D473A0
Fast forwarding: disabled
Forward transitions: 0
Admin edge port: disabled
Oper edge port: disabled
Admin Link type: auto
Oper Link type: point-to-point
Spanning Tree Status: enabled
.
.
.