Figure 13-1, Default port priority – Edge Products ES3528-WDM User Manual

Page 218

Advertising
background image

Class of Service

13-2

13

Web – Click Priority, Default Port Priority or Default Trunk Priority. Modify the default
priority for any interface, then click Apply.

Figure 13-1 Default Port Priority

CLI – This example assigns a default priority of 5 to port 3.

Console(config)#interface ethernet 1/3

24-1

Console(config-if)#switchport priority default 5

31-3

Console(config-if)#end
Console#show interfaces switchport ethernet 1/3

24-11

Information of Eth 1/3
Broadcast threshold: Enabled, 500 packets/second
LACP status: Disabled
Ingress rate limit: Disable, 1000M bits per second
Egress rate limit: Disable, 1000M bits per second
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 5
GVRP status: Disabled
Allowed VLAN: 1(u),
Forbidden VLAN:
Console#

Advertising
This manual is related to the following products: