Edge Products ES3528-WDM - Manual (Page 276)

General Commands
18-4
18
reload
This command restarts the system.
Note: When the system is restarted, it will always run the Power-On Self-Test. It will also
retain all configuration information stored in non-volatile memory by the copy
running-config startup-config command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
prompt
This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 255 characters)
Default Setting
Console
Command Mode
Global Configuration
Example
end
This command returns to Privileged Exec mode.
Default Setting
None
Console#reload
System will be restarted, continue <y/n>? y
Console(config)#prompt RD2
RD2(config)#