Edge Products ES3528-WDM - Manual (Page 270)

Overview of Command Line Interface
17-10
17
Command Groups
The system commands can be broken down into the functional groups shown below .
Table 17-4 Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode, restarting the
system, or quitting the CLI
18-1
System Management Display and setting of system information, basic modes of operation,
maximum frame size, file management, console port and telnet
settings, system logs, SMTP alerts, and the system clock
19-1
Simple Network
Management Protocol
Activates authentication failure traps; configures community access
strings, and trap receivers
20-1
User Authentication Configures user names and passwords, logon access using local or
remote authentication, management access through the web server,
Telnet server and Secure Shell; as well as port security, IEEE 802.1X
port access control, and restricted access based on specified IP
addresses
21-1
Access Control List Provides filtering for IPv4 frames (based on address, protocol, TCP/
UDP port number or TCP control code), or non-IP frames (based on
MAC address or Ethernet type)
23-1
Interface Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
24-1
Link Aggregation Statically groups multiple ports into a single logical trunk; configures
Link Aggregation Control Protocol for port trunks
25-1
Mirror Port Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
26-1
Rate Limit Controls the maximum rate for traffic transmitted or received on a port 27-1
Address Table Configures the address table for filtering specified addresses, displays
current entries, clears the table, or sets the aging time
28-1
Spanning Tree Configures Spanning Tree settings for the switch 29-1
VLANs Configures VLAN settings, and defines port membership for VLAN
groups; also enables or configures private VLANs, protocol VLANs,
and QinQ tunneling
30-1
Class of Service Sets port priority for untagged frames, selects strict priority or weighted
round robin, relative weight for each priority queue, also sets priority for
TCP/UDP traffic types, IP precedence, and DSCP
31-1
Quality of Service Configures Differentiated Services 32-1
Multicast Filtering Configures IGMP multicast filtering, query parameters, and specifies
ports attached to a multicast router
33-1
Domain Name Service Configures DNS services. 34-1
IP Interface Configures IP address for the switch 35-1