Enabling the snmp agent, Table 5-1, Snmpv3 security models and levels – Edge Products ES3528-WDM User Manual
Page 86: Figure 5-1
Simple Network Management Protocol
5-2
5
Note:
The predefined default groups and view can be deleted from the system. You can
then define customized groups and views for the SNMP clients that require access.
Enabling the SNMP Agent
Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).
Command Attributes
SNMP Agent Status – Enables SNMP on the switch.
Web – Click SNMP, Agent Status. Enable the SNMP Agent by marking the Enabled
checkbox, and click Apply.
Figure 5-1 Enabling the SNMP Agent
CLI – The following example enables SNMP on the switch.
Table 5-1 SNMPv3 Security Models and Levels
Model Level
Group
Read View Write View Notify View Security
v1
noAuthNoPriv public
(read only)
defaultview none
none
Community string only
v1
noAuthNoPriv private
(read/write)
defaultview defaultview none
Community string only
v1
noAuthNoPriv user defined user defined user defined user defined Community string only
v2c
noAuthNoPriv public
(read only)
defaultview none
none
Community string only
v2c
noAuthNoPriv private
(read/write)
defaultview defaultview none
Community string only
v2c
noAuthNoPriv user defined user defined user defined user defined Community string only
v3
noAuthNoPriv user defined user defined user defined user defined A user name match only
v3
AuthNoPriv
user defined user defined user defined user defined Provides user
authentication via MD5 or
SHA algorithms
v3
AuthPriv
user defined user defined user defined user defined Provides user
authentication via MD5 or
SHA algorithms and data
privacy using DES 56-bit
encryption
Console(config)#snmp-server
Console(config)#