Overview, Controls and buttons, Connectors and sockets – Silvercrest SSR 1080 B2 User Manual
Page 112
Satellite Receiver SSR 1080 B2
110 - English
Overview
Controls and buttons
1
Switches the device on or into standby mode. / Standby LED
2
Next channel / menu navigation up
3
Previous channel / menu navigation down
4 4-digit
display
5
Decrease volume / menu navigation left
6
Increase volume / menu navigation right
7
CI slot (behind cover)
Connectors and Sockets
8
LNB OUT
To connect another satellite receiver*
9
S/PDIF OPTICAL
Digital audio output (optical)
10
LNB IN
LNB input from satellite system
11
VIDEO
Analogue video connector (Composite)
12
AUDIO L/R
Stereo audio output for connecting a hi-fi system
13
HDMI
HDMI connector to connect a TV set
14
TV SCART
SCART connector to connect a TV set
15
Power cable
Power input 230V AC, 50 Hz
16
Power switch
* Please note than when connecting your SilverCrest SSR 1080 B2 satellite receiver and another external satellite receiver to the LNB OUT (8) port,
your SilverCrest SSR 1080 B2 will be the device defining the (horizontal or vertical) polarity. This means that the satellite receiver connected to the LNB
OUT (8) will only be able to receive channels broadcast with the corresponding polarisation.