Silvercrest SSR 1080 B2 - Manual (Page 118)

Satellite Receiver SSR 1080 B2
116 - English
Wait for the channel search to finish. This process may take a few
minutes. You can press the [Red] button (39) to cancel the channel
search at any time.
When the channel search is completed, the “Do you want to save”
dialogue appears. Select “Yes” to save the found channels or select
“No” to discard them.
OSD Menu
You can use the OSD (On Screen Display) menu to customise your satellite receiver. The OSD menu is explained in more detail in the pages below.
From this menu, you can open different submenus allowing you to adjust some of your satellite receiver's settings. You can customise the look of the
OSD menu, add or remove channels, customise the satellite receiver for your satellite system, install new software, and much more. However, it is also
possible to miss-set some parameters and obtain a blank screen. You should therefore read the following instructions carefully.
To open it, press the MENU button (40). To close the OSD press the EXIT button (24). The OSD menu is clearly structured and any buttons that you
may need to press to change a setting are shown on screen. Please note that the coloured buttons [Red] (39), [Green] (38), [Yellow] (23) and [Blue]
(22) have different functions assigned. The functions currently assigned to the coloured buttons are shown on the screen. The OSD menu is navigated
using the navigation buttons (26).
Opening and Navigating Submenus
Press the /VOL- or /VOL+ (26) navigation buttons to toggle between the main menu and the submenu items. Press the OK/ENTER button (25) to
open the submenus. Press the /P+ or /P- (26) navigation buttons to highlight the desired submenu item and then press OK/ENTER (25) to open it.
Closing the Menus
Any submenus opened can be closed one by one by pressing the MENU button (40). Pressing the EXIT button (24) exits the OSD menu immediately.
Some menus have a help function. Where this is available, the help button is shown on screen. You can show or hide the help
function by pressing the HELP button (42).
Edit Channels
To edit the channel and favourite lists.
The editing procedure is the same for both TV and radio lists. To edit
a radio list, first press the TV/RADIO button (19) to toggle to radio
mode.