Silvercrest COCOON M1450 TWIN - Manual (Page 20)

18
Handset - settings and operation Cocoon M1450 TWIN
• All calls are deleted.
Important
Only the old calls are deleted. New calls, i.e. calls that have not been
read or answered, are retained.
4.6 Redialling options
You have the following options when you are scrolling through the redial memory
(see section “4.3.4 Redialling one of the last 10 numbers called”):
If the phone number you need is shown in the display, press ‘Option’
2 and use 3
or 11 to select from the following options:
1. ‘Save Number’: saves the number to the phonebook.

Press 2 to confirm. Enter a name (see also section “6.1 Saving a new entry in
the phonebook”) and press ‘Save’ 2 .

Edit the phone number and press ‘Save’ 2 .

Select the ringer melody you require and press ‘Save’ 2 .
2. ‘Delete’ : Deletes an entry from the redial list.

Press 2 to confirm.
3. ‘Delete All’: Deletes all entries from the redial list. Press twice 2 to confirm.
4.7 Activate/deactivate handsfree mode
This function allows you to make a call without having to hold the handset in your hand.
1. Press
12 while you are making a call to activate handsfree mode.
2. Press 12 again to deactivate the handsfree function.
Info
If you are calling in handsfree mode and wish to change the volume

press 3 or 11 several times.
Important
The batteries will be drained more quickly if you use the handsfree
function for some time.
4.8 “Out of range” warning
When the handset is out of range of the base unit during communication:
•
‘Searching’ appears in the display and the icon flashes in the display.
1. Move closer to the base unit.
•
The no longer flashes and is shown steadily.
• You are back within the base unit's range.
4.9 Setting the loudspeaker volume
Press 3 or 11 while you are making a call to set the volume of the loudspeaker.
You can choose between 5 different settings. The default setting is level 3:
Volume 1
Volume 2
Volume 3
Volume 4
Volume 5
Info
The volume is adjusted in the same way in handsfree mode.