Silvercrest COCOON M1450 TWIN - Manual (Page 33)

31
Cocoon M1450 TWIN Answering machine
ENGLISH
8.4.3 Receiving an external call during an internal call
When you receive an external call during an internal call, you will hear the call waiting tone
(double beep) in both of the handsets participating in the internal call.
1. Press
8 .
• The internal communication is ended.
2. Press 12 .
• You are now in communication with the outside caller.
8.4.4 Transferring a call to another handset
•
You have an external caller on the line.
1. Press INT 13 .
• ‘Internal’ appears in the display.
2. Dial the number of the handset to which you would like to transfer the call.
EITHER
•
The handset dialled answers, you can then have an internal conversation.
3. Press 8 to connect the external caller to the handset you have called.
OR
•
The internal subscriber does not answer.
4. Press ‘End’ 2 to return to the external caller or to swap from one call to the other.
8.4.5 Conference call (two internal handsets and one external caller)
You can have a telephone conversation with one internal and one external caller at the
same time.
1. Press INT
13 , while you are talking to an external caller.
• The outside line is put on hold.
2. Dial the number of the handset you would like to include in the call. You can switch back
and forth between the internal line and the external line by pressing INT 13 .
3. When the dialled handset picks up, press ‘Conf.’ 2 .
• You are now connected to an external and an internal caller and you can talk to them
both at the same time (conference call).
8.5 Voice mail indicator
This indicator only works if you have enabled a voicemail or telephone messaging
service and your network provider sends this information together with Calling Line
Identification Presentation.
The
icon appears in the display if you have a new message in your voicemail box.

The icon disappears once you have listened to your message.
9 Answering machine
The Cocoon M1450 has an integrated digital answering machine with a recording capacity
of approximately 20 minutes. This recording capacity is reduced by the duration of the
outgoing messages you record. The answering machine can be operated remotely and you
are able to record two outgoing messages (OGM 1 and OGM 2, maximum length 2 minutes
each). The outgoing messages' functions differ as follows:
•
With OGM 1, the caller can leave a message.
• With OGM 2, only the outgoing message is played, without leaving the caller the
opportunity to leave a message.
The maximum recording time for each incoming message is 3 minutes.