Silvercrest SNM 33 B1 - Manual (Page 77)

GB / IE 77
Getting ready
Attaching the presser foot holder
Attention:
2. Attaching the presser foot
3. Removing the presser foot
4. Attaching the edge/ quilt guide
Turn power switch to off ("O") when
carrying out any of the above operations!
1. Raise the presser bar (A) with the
presser foot lifter. Attach the presser foot
holder (B) as illustrated.
Lower the presser foot holder (B) using
the presser foot lifter, until the cut-out (C)
is directly above the pin (D)
The presser foot (F) will engage
automatically.
Raise the presser foot using the presser
foot lifter.
Raise the lever (E) and the foot
disengages.
Attach the edge/ quilt guide (G) in the
slot as illustrated.
Adjust as needed for hems, pleats,
quilting, etc.
When sewing several layers or thick fabrics,
the presser foot can be raised a second
stage for easy positioning of the work. (A)
C
D
E
F
E
G
B
A
1 2
3 4
Two-step presser foot lifter
A