Silvercrest SNM 33 B1 - Manual (Page 82)

82 GB / IE
Sewing basics
How to choose your pattern
For , select pattern "A" with
pattern selector dial. Adjust the stitch length
with the stitch length dial. You may choose
any needle position, by turning the stitch
width dial.
For , select pattern "B" with
pattern selector dial. Adjust the stitch length
and stitch width according to the fabric
being used.
To obtain any of the other
on the stitch selection
panel, select the letter above the stitch with
the stitch selector dial. Adjust the stitch
length and the stitch width with the control
dials according to the result desired.
To obtain any of the
, turn the stitch length dial to
"S1", to obtain any of the
, turn the stitch length dial to "S2",
select the pattern desired with the pattern
selector dial and adjust the stitch width with
the stitch width dial.
straight stitch
zigzag stitch
patterns shown
in the upper row
patterns on the
second row
patterns on the
third row
Straight stitching and needle position
Stitch length dial Stitch width dial
5 0
1
2 3
4
5 2.5 0
S1
Turn the pattern selector dial to "A" (straight
stitch).
Generally speaking, the thicker the fabric,
thread and needle, the longer the stitch
should be.
Choose your needle position, from left
position to right needle position by changing
the stitch width dial from "0" to "5".
Stitch width dial Reverse
sewing lever
Stitch length dial S1-S2
Pattern
selector dial
0.5 1 2 3 4