Silvercrest SNM 33 B1 - Manual (Page 89)

Stitch Stitch width Stitch length
I 3~5 1~2
GB / IE 89
Scallop stitching
This machine automatically produces a
scallop stitch which may be used as
decorative edging.
1. Sew the scallop stitch along the edge of
the material.
2. If desired, trim around the scallop with
scissors to create a scalloped edge. Be
careful not to cut the thread.
Sewing basics
Twin needle
Please note:
When sewing with twin needle, always
proceed slowly, and make sure to maintain
a low speed to insure quality stitching.
When using twin needle on zig-zag make
sure the stitch width dial is set between
"0" and "3". Do not use twin needle at
setting above "3".
Make sure that the two threads used to
thread the twin needle are of the same
weight. You can use one or two colors.
1. Insert the secondary spool pin (q) into
the hole provided for this purpose on the
top of the sewing machine using the
double needle. Place the felt cushion (h)
on the secondary spool pin (q). Next
insert another spool (m) on the
secondary spool pin.
2. Insert the twin needle in the same way
as single needle.
3. Flat side of needle should face away
from you.
4. Follow instructions for single needle
threading. Thread each needle
separately.
Stitch Stitch width Stitch length
A 2.5 1~4
h
1
1 2