Extreme Networks Summit1 - Manual (Page 102)

5-16 S UMMIT S WITCH I NSTALLATION AND U SER G UIDE
V IRTUAL LAN S (VLAN S )
VLAN C ONFIGURATION E XAMPLES
The following example creates a port-based VLAN named accounting, assigns the IP
address 132.15.121.1, and assigns ports 1, 2, 3, and 6 to it:
create vlan accounting
config accounting ipaddress 132.15.121.1
config default delete port 1-3, 6
config accounting add port 1-3,6
Because VLAN names are unique, you do not need to enter the keyword vlan
after you have created the unique VLAN name. You can use the VLAN name
alone.
The following example creates a tag-based VLAN named video. It assigns the VLANid
1000. Ports 4 through 8 are added as tagged ports to the VLAN.
create vlan video
config video tag 1000
config video add port 4-8 tagged
The following example creates a VLAN named Sales, with the VLANid 120. The VLAN
uses both tagged and untagged ports. Ports 1 through 3 are tagged, and ports 4 and 7
are untagged. Note that when not explicitly specified, ports are added as untagged.
create vlan sales
config sales tag 120
config sales add port 1-3 tagged
config sales add port 4,7
The following example creates a protocol-based VLAN named IPSales. Ports 6 through 8
are assigned to the VLAN.
create vlan ipsales
config ipsales protocol ip
config ipsales add port 6-8
The following example defines a protocol filter, myprotocol and applies it to the VLAN
named myvlan. This is an example only, and has no real-world application.
create protocol myprotocol
config protocol myprotocol add etype 0xf0f0
config protocol myprotocol add etype 0xffff
create vlan myvlan
config myvlan protocol myprotocol
Summit.bk : 5VLAN.FM Page 16 Thursday, June 18, 1998 9:27 AM