Extreme Networks Summit1 - Manual (Page 200)

13-6 S UMMIT S WITCH I NSTALLATION AND U SER G UIDE
U SING E XTREME W ARE V ISTA
• Click the Logout tab.
If you attempt to log out without saving your changes, ExtremeWare Vista prompts
you to save your changes.
If you select Yes, the changes are saved to the selected configuration area. To change
the selected configuration area, you must go to the Configuration task tab, Switch
option.
D
O A GET W
HEN
C
ONFIGURING A
VLAN
When configuring a VLAN using ExtremeWare Vista, prior to editing the VLAN
configuration you must first click on the
get button to ensure that subsequent edits are
applied to the correct VLAN. If you do not click on the get button and you submit the
changes, the changes will be made to the VLAN that was previously displayed.
If you configure a VLAN and then delete it, the Default VLAN is shown in the VLAN
name window, but the VLAN information contained in the lower portion of the page is
not updated. Click on the
get button to update the display.
S ENDING S CREEN O UTPUT TO E XTREME N ETWORKS
If Extreme Networks requests that you e-mail the output of a particular ExtremeWare
Vista screen, do the following:
1 Click on the content frame of the screen that you must send.
2 From Netscape Navigator, select Save Frame As from the File menu, and enter a
name for the file.
3 From Microsoft Internet Explorer, select Save As File from the File menu, and enter a
name for the file.
4 Attach the file to the e-mail message that you are sending to Extreme Networks.
Summit.bk : 13VISTA.FM Page 6 Thursday, June 18, 1998 9:27 AM