Extreme Networks Summit1 - Manual (Page 181)

S UMMIT S WITCH I NSTALLATION AND U SER G UIDE 12-5
S TATUS M ONITORING
show port {<portlist>} information Displays detailed system-related information, including
the following:
■
Port state
■
Link state
■ Autonegotiation state
■
Link speed
■
Duplex mode
■ Load sharing information
■
EDP status
■
SummitLink mode
■
VLAN information
■
QoS information
show port {<portlist>} packet Displays a histogram of packet statistics.
show port {<portlist>} qosmonitor Displays real-time QoS statistics.
show port {<portlist>} rxerrors Displays real-time receive error statistics.
show port {<portlist>} stats Displays real-time port statistics.
show port {<portlist>} txerrors Displays real-time transmit error statistics.
show port {<portlist>} utilization Displays real-time port utilization information. Use the
[Spacebar] to toggle between packet, byte, and
bandwidth utilization information.
show protocol {<protocol> | all} Displays protocol information including protocol name,
protocol fields, and the list of VLANs that use this
protocol.
show qosmonitor Displays the QoS monitor configuration and results.
show qosprofile {<qosname> | all} Displays QoS profile information including the QoS
profile name, minimum bandwidth, maximum
bandwidth, and priority levels. Also displays the
groupings to which this QoS profile is applied.
show rip {vlan <name> | all} Displays RIP configuration and statistics for one or
more VLANs.
Table 12-1: Switch Monitoring Commands (continued)
Command Description
Summit.bk : 12STATUS.FM Page 5 Thursday, June 18, 1998 9:27 AM