Predefined protocol filters, Defining protocol filters – Extreme Networks Summit1 User Manual

Page 98

Advertising
background image

5-12

S

UMMIT

S

WITCH

I

NSTALLATION

AND

U

SER

G

UIDE

V

IRTUAL

LAN

S

(VLAN

S

)

P

REDEFINED

P

ROTOCOL

F

ILTERS

The following protocol filters are predefined on the Summit:

IP

IPX

NetBIOS

DECNet

IPX_8022

IPX_SNAP

AppleTalk

D

EFINING

P

ROTOCOL

F

ILTERS

If necessary, you can define a customized protocol filter based on EtherType, LLC,
and/or SNAP. Up to six protocols may be part of a protocol filter. To define a protocol
filter, do the following:

Create a protocol using the following command:

create protocol <protocol_name>

For example:

create protocol fred

The protocol name can have a maximum of 31 characters.

Configure the protocol using the following command:

config protocol <protocol_name> add <protocol_type> <hex_value>

Supported protocol types include:

etype

— EtherType

The values for

etype

are four-digit hexadecimal numbers taken from a list

maintained by the IEEE. This list can be found at the following URL:

http://standards.ieee.org/regauth/ethertype/index.html

llc

— LLC SAP

The values for

llc

are four-digit hexadecimal numbers that are created by

concatenating a two-digit LLC Destination SAP (DSAP) and a two-digit LLC
Source SAP (SSAP). The list of LLC SAPs can be found at the following URL:

http://stdsbbs.ieee.org/pub/general/LLC_list.txt

Summit.bk : 5VLAN.FM Page 12 Thursday, June 18, 1998 9:27 AM

Advertising