Extreme Networks Summit1 - Manual (Page 166)

10-18 S UMMIT S WITCH I NSTALLATION AND U SER G UIDE
R OUTING P ROTOCOLS
config ospf area 0.0.0.6 stub nosummary stub-default-cost 10
config ospf vlan LA_161_48_2 area 0.0.0.6
config ospf vlan Chi_160_26_2 area 0.0.0.5
config ospf add virtual-link 160.26.25.1 0.0.0.5
config ospf add vlan all
enable ospf
C ONFIGURATION FOR IR1
The following is the configuration for the router labeled IR1:
config vlan HQ_10_0_1 ipaddress 10.0.1.2 255.255.255.0
config vlan HQ_10_0_2 ipaddress 10.0.2.2 255.255.255.0
config ospf add vlan all
enable ipforwarding
enable ospf
D ISPLAYING OSPF S ETTINGS
To display settings for OSPF, use the commands listed in Table 10-5 .
Table 10-5: OSPF Show Commands
Command Description
show ospf Displays global OSPF information.
show ospf area {<areaid> | all} Displays information about a particular OSPF
area, or all ospf areas.
show ospf interfaces {vlan <name> | area
<areaid> | all} Displays information about one or all OSPF
interfaces. If no argument is specific, all
OSPF interfaces are displayed.
show ospf lsdb {detail} {area <areaid> | all}
{router | network | summary_net | summary_asb
| as_external | all} Displays a table of the current link state
database. You can filter the display using
either the area ID or the remote router’s
router ID, or the link state ID. The default is
all with no detail. If detail is specified,
each entry includes complete LSA
information.
show ospf virtual-link {<areaid> <routerid> | all} Displays virtual link information about a
particular router or all routers.
Summit.bk : 10PROT.FM Page 18 Thursday, June 18, 1998 9:27 AM