EDGE Tech QL Series - Manual (Page 14)

14
QL Series User Guide
Battery packs which are only partially discharged will take
less time to reach their charged state. Batteries which have
reached 80% of their charge capacity may be used, however,
it is recommended that you allow the batteries to reach a full
charge to maintain maximum battery life.
The UCLI72-4 Quad Charger has a safety feature which
stops charging a battery after six hours regardless of
its charge state.
Battery Safety
Avoid accidental short circuiting of any battery. Allowing
battery terminals to contact conductive material will create a
short circuit which could cause burns and other injuries or could
start a fire.
Use of any charger not approved specifically by Zebra for use with
its batteries could cause damage to the battery pack or the
printer and will void the warranty.
Fault
Fast C
harg e
Fault
Fast C
harg e
Fault
Fast C
harg e
Read
y
Pow er
Full C
harg e
Read y
Full C
harg e
Read
y
Full C
harg e
Full C
harg
e Fault
Fast C
harg e
Read
y
continued
Charger Bay
Amber
Indicator
Green
Indicator
Power Indicator
Power Supply
Figure 4: Quad Charger
1. Slide Battery Pack into
Charger bay
2. Rock Battery Pack
into place