EDGE Tech QL Series - Manual (Page 30)

30
QL Series User Guide
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove
presumption of compliance with the R&TTE Directive 1999/5/EC:
• EN 60950: 2000
Safety of Information Technology Equipment
• EN 300 328-2 V1.4.1 (2003-04)
Technical requirements for spread-spectrum radio equipment
• EN 301 489-1/-17 V1.4.1/1.2.1 (2002-08)
EMC requirements for spread-spectrum radio equipment.
This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home
and office use in all EU and EFTA member states.
Bluetooth™ Networking Overview
In order to exchange data, two Bluetooth enabled devices
must establish a connection. Bluetooth software is always
running in the background, ready to respond to connection re-
quests. One device (known as the master or the client) must
request a connection with another. The second device (the
slave or the server) then accepts or rejects the connection. A
Bluetooth enabled QL series printer will normally act as a
slave, but in theory any Bluetooth device can be either a mas-
ter or a slave. This miniature network is sometimes referred to
as a “piconet” and can consist of several Bluetooth enabled
devices.
For the most part, communications using the Bluetooth pro-
tocol are initiated and processed without any operator inter-
vention, much like the IrDA system described previously.
Each Bluetooth enabled QL series printer has a unique Blue-
tooth Device Address (BDA) loaded into its QuickLink module
when manufactured.