EDGE Tech QL Series - Manual (Page 25)

25
QL Series User Guide
Extended LCD Functions
Function Default setting Scroll & Select Options
Sensor Type Gap • Bar
• Gap
Baud Rate 19200 • 9600
• 19200
• 32400
Data Bits 8 • 7
• 8
WLAN ID* Factory Set N/A
Value
Label Top 000 • Increase (+120 dots
max.)
• Decrease (-120 dots
max.)
Left Position 000 • Increase (+120 dots
max.)
• Decrease (-120 dots
max.)
LCD Contrast 0 • Increase
• Decrease
No-activity Timeout* 60 sec. • 60 sec.
• 5 min.
• 10 min.
• 30 min
• Custom
Tear-off Position 00 • Increase (+120 dots
max.)
• Decrease (-120 dots
max.)
Media Type Label • Label
• Journal
Media Width Sensing† Off • On
• Off
• Display Width
LCD Backlight Off • On
• Off
• Momentary On w/
time delay
Factory Reset No • No
(Resets all to • Yes
factory set values)
* Some parameters, such as the WLAN ID number and non-standard no-activity time
out values can be set using a PC running Zebra’s Label Vista label creation program
and a data cable link to the printer.
† Media width sensing is an option. Display for this option may not be visible, or selec-
tion options may change, depending on the printer’s application.