EDGE Tech QL Series - Manual (Page 42)

42
QL Series User Guide
Desk Stand
Refer to Figure 16. To use
the Desk Stand: Slide the
printer onto the Desk stand
as shown. The printer’s belt
clip will hook onto the Desk
Stand as shown and retain it
in place. Ensure that the
clip is securely attached to
the Stand and the media
compartment of the printer
is seated securely in the
stand.
Refer to the Specifications
section for Desk Stand part
numbers.
Holes are provided to per-
manently attach the Desk
Stand to the work surface.
The charger and data I/O ca-
bles may be plugged into
the printer in the usual man-
ner.
Refer to the section on using
the chargers for more
information.
Desk Stand
Hook
Belt Clip
over the
Stand
Figure 16: Optional Desk Stand