Ql 320 cleaning, Edge guides, Exterior – EDGE Tech QL Series User Manual
Page 49: Interior, Linerless platen, Peel bar, Printhead, Sensors, Tear bar
Advertising
49
QL Series User Guide
Printhead
Elements
Peeler Bar
Rollers
Located under “EZ-
Peel” Peelerl
Platen surface
Avoid using alcohol
on linerless platen
surface
Tear Bar
Label
Presence
Sensor
Bar Sensor
Gap
Sensor
Bearing Points
Linerless Platens only
Media Disks,
Inner surfaces on
both sides.
Units with linerless
platens only.
Peeler Bar
or
Scraper
used on units
with linerless
platens only.
Figure 20: Cleaning the QL 320
continued
Advertising