Maintenance and cleaning, Cleaning performed by a qualified technician – MCZ Forma Wood 75 Dx User Manual

Page 32

Advertising
background image

30

6-MAINTENANCE AND CLEANING

CLEANING THE ASH

One recommends adequate cleaning of the hearth for proper combustion. To remove the ash from the hearth use a metal scoop and brush

and store the ash in non-flammable containers for transport.

Hot ashes must not be stored outside unsupervised or thrown into the rubbish bin. Allow it to cool in the open air in a

metal container.

CLEANING THE REFRACTORY PARTS (ALUTEC®)

They do not require any cleaning as the characteristic of this material (ALUTEC®) is that it does not absorb soot but instead it repels it when

the fireplace is hot. After the start-up stage in which the fireplace tends to tarnish, the refractory parts will turn white again, starting from

the base of the flame, when the combustion chamber reaches working temperature (~ 400° C).

If this phenomena does not take place it may be caused by:

• Damp or resinous wood that does not emit sufficient heat or that dirties the combustion chamber

• Chimney with poor performance and therefore smoke stays in the combustion chamber for too long, dirtying the firebox

• Chimney with low performance that does not allow the closed fireplace to reach high efficiency and therefore adequate temperatures

for the refractory parts.

Never clean the refractory parts with a damp cloth or other as it could get stained.

If required use a dry paintbrush to remove thick accumulations of soot.

Should the Alutec not whiten, it must not be considered as a defect in light of the warnings and indications reported

above.

CLEANING PERFORMED BY A QUALIFIED TECHNICIAN

CLEANING THE CHIMNEY

We recommend the mechanical cleaning of the flue pipe at least once a year; excess build-up of unburned waste could cause problems

with the smoke outlet pipe and start a fire in the flue pipe itself. To clean the chimney flue by accessing from the appliance, remove the

smoke deflector: to remove it properly lift it from the front part and make it simultaneously come forwards to free it from the resting

supports at the back.

Advertising
This manual is related to the following products: