MCZ Vivo 70 Wood User Manual
Page 29
Chapter 5
INSTALLATION AND USE MANUAL
page
29
Comfort air kit
Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
2
3
4
4a
5a
4b
1
5
5.5. GENERAL INFORMATION ON THE CONTROL UNIT
1. “ON” –“OFF” indicator light
2. Fan active light
3. Fan speed control knob
4. MAN/AUT button
4a. Automatic
4b. Manual
5. Lamp on button
5a. Lamp on/off
The device makes it possible to control the speed of the fan it is
connected to.
The speed is set by turning the knob to 10 speed steps:
0 ,V1; ….. V9, V10.
MANUAL/AUTOMATIC
mode is set using button 4.
5.5.1.
On/off
The control unit is turned on and off by turning knob 3.
On status is indicated by LED 1.
5.5.2.
Operation
Activation of the fan is signalled by LED 2
AUTOMATIC mode (AUT LED
on 4a)
The AUT is generally used to turn off the fan.
For example, in the evening you can load wood for the last time
and turn the selector to AUT. The fan, with the consent of the
probe, will continue to provide hot air until the temperature
drops. In this way, you will keep the room comfortable all night
long. The next morning, the fire box will contain embers ready
for a new load of wood or it will be out.