Evolve Communications RD5000 - Manual (Page 15)

14 *Trademark
Getting Started
6
7
8
Read and follow the
instructions on the screen.
Press the Down Arrow key
to read all the text.
Press the Right Arrow key to
continue.
To test codes, point the
remote toward the TV and
press keys like “POWER”,
“VOL”, “CHAN”, etc.
If the keys respond, highlight
Yes and press the SELECT
key, then go to step 8.
If the keys do not respond,
highlight
No and press the
SELECT key. (repeat step 7
to test the next code)
Once a code is found that
operates your device, basic
setup is complete.
Press the Right Arrow key.
Setup Remote Control
Note If more than one of any type of device is setup in your remote (i.e. 2 or more
TVs or VCRs), they will be sequentially numbered (i.e. TV, TV#2, TV#3 or
VCR, VCR#2, VCR#3, etc.). The devices will appear in the order that you
set them up.