Evolve Communications RD5000 - Manual (Page 27)

26 *Trademark
2. Changing Modes
Set up all the devices you want to control with your GUIDE Remote *. Changing
modes to control a device of your choice is fast and easy.
To change modes, perform the following steps:
Using the Remote
1
2
Press the Mode Right or
Mode Left key and a small
popup screen will appear at
the top of the remote screen
indicating the current mode.
Press the Mode Right or
Mode Left key again to
switch to different modes.
Continue pressing the MODE
keys until you find the device
you want to control.
Note The current mode for your device is always indicated on the Channel and
Promo Screens (see page 45).
Changing Modes
Note If there are no devices setup in your remote and you press a MODE key, a
“NO DEVICES” popup appears.
Note If more than one of any type of device is setup in your remote (i.e. 2 or more
TVs or VCRs), they will be sequentially numbered (i.e. TV, TV#2, TV#3 or
VCR, VCR#2, VCR#3, etc.). The devices will appear in the order that you
set them up.