Evolve Communications RD5000 - Manual (Page 49)

48 *Trademark
Time and Date Reset
You will see this screen when you install new
batteries. You can set the time and date
manually by pressing the Right Arrow key and
going into the Set Time and Date section in the
menu. For most accurate settings, we
recommend that you log onto our Website and
sync your remote.
No DirecTune* Device Found
You will see this screen when you try to exit out
of a menu and did not setup a
DirecTune
device.
Please setup DirecTune...
You will see this screen when you press an
Interactivity key and did not setup a
DirecTune
device. This screen will also appear if you did
not set up a
DirecTune device before attempting
to request promos.
9. Alert Screens
The GUIDE Remote * has various alert screens that will help you to operate the
remote smoothly. Below are some examples of the types of screens that you might
encounter.
Note To avoid seeing these screens, setup a DirecTune* device under the
MENU key. (see page20 to setup DirecTune)
Please setup DirecTune
You will see this screen when you try to tune
from within the Program Listings and did not
set up a
DirecTune device.
Using the Remote
Alert Screens