Evolve Communications RD5000 - Manual (Page 45)

44 *Trademark
Using the Remote
Accessing the Extended Function Screen
To access the Extended Function Screen, perform the following steps:
1
2
Press the Up / Down Arrow
key to move the highlight bar.
Press the Left / Right Arrow
key to access the previous or
next screen.
Press the SELECT key to
send a command to the
device.
Press the ADVANCED key.
Tip You don’t have to exit the Extended Function Screen to change device
modes. Press the MODE keys to change modes.
Note If you are in the menu system, press the EXIT key and then press the
ADVANCED key to access the Extended Function Screens.
Using the ADVANCED Key
Note You may see more functions in the Extended Function Screen than were on
your original remote. If you experience a command not working, verity that
you have selected a function that works on your original remote.