Evolve Communications RD5000 - Manual (Page 25)

24 *Trademark
Note Depending on your device you might need to test several tuning methods to
find the correct one.
11
If your TV tunes channels
properly, highlight
Yes and
press the SELECT key. (go
to step 12)
If your TV does not tune
channels properly, highlight
No and press the SELECT
key. (repeat step 10)
12 DirecTune setup is complete.
Press the Right Arrow key.
Getting Started
Note If you experience problems tuning channels after you set up DirecTune* , you
should first try changing the DirecTune Speed in: Main Menu > Remote
Settings > Advanced Settings > Adjust DirecTune Speed (see page 53).
If this doesn’t work then try changing the DirecTune Method in: Main Menu
> Remote Settings > Advanced Settings > Adjust DirecTune Method
(see page 51).
10 Test the CHAN+ / CHAN- key
to see if your TV tunes
channels properly.
Press the Right Arrow key
when you are finished testing.
9 Read and follow the
instructions on the screen
and press the Right Arrow
key to continue.
Setup DirecTune