Evolve Communications RD5000 - Manual (Page 19)

18 *Trademark
Getting Started
7b
7c
8
Press the ADVANCED key to
access the Extended
Function Screen.
To test codes, highlight a
function from the list and
press the SELECT key. Only
functions which are also
present on your original
remote will work on your
device.
Press the Up / Down
Arrow key to access
additional functions.
When you’re finished testing,
press the Right Arrow key.
Once a code is found that
operates your device, basic
setup is complete.
Press the Right Arrow key.
7d
If the keys respond, highlight
Yes and press the SELECT
key then, go to step 8.
If the keys do not respond,
highlight
No and press the
SELECT key. (repeat step 7b
to test the next code)
Note When testing functions from the list, you must pick the correct function as on
your original remote. There may be many other additional functions
on the list that do not relate to your device. If the appropriate functions
respond, you have found the right code.
Setup Remote Control