Evolve Communications RD5000 - Manual (Page 56)

55 *Trademark
5. Channel Key Settings
Advanced Settings
Channel Key Settings allow you to operate the Channel keys in two different ways.
(1) The default setting in your remote is for the CHAN + / CHAN - key to change
channels independent of the Program Listings you selected at the website.
Therefore, when you press Channel keys your TV will tune to all the channels you
get from your Service Provider (i.e. antenna, cable or satellite)
(2) You may choose to setup the CHAN + / CHAN - key to match your Program
Listings lineup. In that case, when you press the Channel keys your TV will tune
only to those channels in your Program Listings lineup. This gives you the
flexibility to customize the channels however you like.
To set CHAN + / CHAN - key to match Program Listings, perform the following
steps:
1
2
Press the MENU key and SELECT Main Menu > Remote Settings >
Advanced Settings > Channel Key Settings
Read and follow the
instructions on the screen.
Press the Down Arrow key
to read all the text.
Press the Right Arrow key
to continue.
Channel Key Settings