PRAKTICA luxmedia 16-Z24S User Manual

Page 14

Advertising
background image

14

• To charge using a USB connection to a computer

The battery loaded in the camera is charged whenever the camera is connected
directly to a computer with the USB cable.

• Depending on the setup of your computer, you may not be able to charge the

camera’s battery over a USB connection. If this happens, use of the USB adapter
that comes with the camera is recommended.

1.

Turn off the camera.

Check to make sure that the camera’s monitor
screen is blank. If it isn’t, press [ON/OFF]
(Power) to turn off the camera.

IMPORTANT!

• The first time you connect the camera to your computer with the USB cable, an

error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.

Monitor
screen

[ON/OFF] (Power)

Advertising