PRAKTICA luxmedia 16-Z24S - Manual (Page 61)

61
1.
In the PLAY mode, use [ ] and [ ] to scroll through the images until
the one you want is displayed.
2.
Slide the zoom controller towards to zoom.
You can use [ ], [ ], [ ], and [ ] to scroll the
zoomed image on the monitor screen. Slide the
zoom controller towards to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is
currently displayed.
– To exit the zoom screen, press [ ] (Delete).
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up
to the full 8X.
• Pressing [SET] will lock the current zoom factor for
the on-screen image. You can then use [ ] and [ ] to scroll between images,
using the same zoom factor. Pressing [SET] again will unlock the zoom factor
and allow you to use [ ], [ ], [ ] and [ ] to move around the currently
displayed images.
1.
In the PLAY mode, slide the zoom controller
towards .
Use [ ], [ ], [ ] and [ ] to move the selection
boundary around the image menu.
To view a particular image, use [ ], [ ], [ ], or [ ] to
move the selection boundary to the image you want
and then press [SET].
Zooming an On-screen Image
Displaying the Image Menu
Image area
Current display area
Zoom factor
Boundary