PRAKTICA luxmedia 16-Z24S - Manual (Page 38)

38
The Silent mode automatically disables flash, mutes operation tones, and configures
other settings to avoid disturbing others around you. It comes in handy when shooting
in a museum or other areas where flash photograph is prohibited.
1.
In the REC mode, press [SET].
2.
Use [ ] and [ ] to select the seventh Control Panel option from the top
(Silent Mode).
3.
Use [ ] and [ ] to select “On” and then press [SET].
This enters the Silent mode, which is indicated by (Silent) on the monitor
screen. The following shows the camera setup in the Silent mode.
• As shown in the example to the right, Flash and Self-timer are not included in
the control panel. This means that these settings cannot be changed from the
Control Panel.
• See the following for details.
– Flash (page 35)
– Self-timer (page 37)
– Sounds (page 83)
• Entering the Silent mode in the REC mode will also enter the Silent mode in the
PLAY mode automatically (page 67).
Shooting without Disturbing Others (Silent Mode)
Flash Off
Self-timer Off
Sounds Off