PRAKTICA luxmedia 16-Z24S - Manual (Page 57)

57
Procedure
[ ] (REC) [SET] MENU Quality Tab Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting a finely detailed image
of nature that includes dense tree branches or leaves, or an image of a complex
pattern.
Procedure
[ ] (REC) [SET] MENU Quality Tab EV Compensation
You can manually adjust an image’s exposure value (EV value) before shooting it.
• EV Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.
Use [ ] and [ ] to adjust the exposure compensation value.
To cancel exposure compensation, change the EV value to 0.0.
2.
Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Image Quality Settings (Quality)
Specifying Snapshot Image Quality (Quality (Snapshot))
Fine Gives image quality priority.
Normal Normal
Correcting Image Brightness (EV Compensation)
[ ] : Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[ ] : Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.